04.03.24

Wetrok cleaning methods: wet wipe pre-moistened

Pre-moistened wet mopping is a practical and efficient method for cleaning floor surfaces. This technique uses specially prepared wipes soaked with the optimum amount of detergent and water to thoroughly remove dirt and dust. In this article, you will learn how pre-moistened wet mopping works and what benefits it offers for your cleaning routine.Heute stellen wir Ihnen das "Nass wischen vorbefeuchtet" vor.

The method briefly explained

With the pre-wetted cleaning textile and the wet mopping device, easily adhering dirt can be removed mechanically and chemically from smooth floor coverings in a single operation. This method is suitable for both waterproof and water-sensitive floor coverings. The residual moisture left on the floor dries quickly so that the floor covering can be walked on again quickly. After cleaning, the floor covering is free of slightly adhering dirt and presents a uniformly clean appearance.

You can find the recommendations in the Wetrok cleaning and care instructions: Cleaning and Care Instructions – Technische Datenblätter (wetrok.com)

Preparation

• Select the appropriate products according to the surface to be cleaned (type and m²) and the degree of soiling.
• Prepare a sufficient quantity of ready-to-use disposable mops in the packaging.
• Put up the warning sign.
• Remove loose dirt (wipe with a dust-binding cloth or vacuum dry).

Main work

• Take a pre-wetted disposable mop out of the packaging, lay it on the floor in the room and place the wet mopping device with the micro Velcro soleplate on it.
• First wipe along the edges and under the furniture, then wipe the free surface with the damp mop and the wet mopping device in slightly overlapping strips.
• Change the dirty mop in good time and throw it in the bin. Continue with step 1 of the main work until the entire surface has been cleaned.
• Lift the wet mopping device off the floor and detach the disposable mop from the wet mopping device. Collect the dirt and the disposable mop with the shovel and the hand mop and dispose of them in the waste.
• Carry out the inspection.

Final work

• Remove the warning sign as soon as the floor covering is dry.
• Dispose of the used mops with the waste.
• Dispose of the waste.
• Clean the cleaning material and replace if necessary.

Remark

• Wear the protective equipment (PPE) required in accordance with company regulations, safety data sheets or operating instructions.
• Always check in advance which product meets your requirements (see Wetrok cleaning and care instructions) at www.wetrok.com.
• Wetrok AG accepts no liability for damage caused by improper use or incorrect product selection.